S8 Quattro Sedan V10-5.2L (BSM) (2009)
![background image](/audi/s8_quattro_sedan/v10-5.2l_(bsm)/Page-400006.png)
Installing
Installation is performed in the reverse order of removal. Observe the following when doing so:
-
Coat the O-ring - arrow - lightly with engine oil and insert it in the power steering pump input shaft.
-
Drive the seal in with the (T40052).
-
Install the power steering pump. Refer to => [ Power Steering Pump ].
Suction and Return Hoses, Installed Position