S8 Quattro Sedan V10-5.2L (BSM) (2009)
![background image](/audi/s8_quattro_sedan/v10-5.2l_(bsm)/Page-184001.png)
Oil Level Sensor: Service and Repair
Oil Level Thermal Sensor
Removing
-
Drain engine oil.
-
Disconnect electrical connector - 3 -.
-
Remove the nuts - 1 - and the oil level thermal sensor (G266) - item 4 -.
Installing
Installation is in reverse order of removal, note the following:
‹› Replace the seal - 2 -.
-
Fill engine oil and check oil level.
Tightening Specifications