S8 Quattro Sedan V10-5.2L (BSM) (2009)
Power Adjustable Steering Column Switch: Service and Repair
Switches
Steering Column Adjustment Switch
Special tools, testers and auxiliary items required
‹› T8 screwdriver (T40056 A)
Removing
CAUTION!
Follow safety precautions when working on knee airbag.
-
Remove driver's storage compartment.
-
Adjust steering wheel downward and to rear as far as possible, use entire adjustment range of steering column adjustment for this.
-
Remove bolts - 3 - and - 4 - using T8 screwdriver (T40056 A).
-
Remove TORX bolt - 5 -.
-
Disconnect upper trim - 2 - for steering column switch from lower trim - 1 - and remove both sections.
-
Disconnect electrical harness connector at lower trim.
‹› Steering wheel has been removed in illustration.
-
Remove screws - arrows -.