audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Trunk/Liftgate Sensor/Switch (For Alarm) > < Ignition Key In Signal, Antitheft|Service and Repair|Page 4663
Page 1
background image

Keyless Entry: Description and Operation

General Information

NOTE:

-

After the car has been parked for a lengthy time and/or after replacing the central locking system pump, the central locking system must be
operated several times before it will function properly.

-

When the system is operating correctly, all locks will close within approx. 2 seconds. If the pump operates for longer than 5 seconds there is a
leak in the system. When there is a leak in the system, the pump must not run for more than 30 seconds, after which the control module in the
central locking system pump must switch off the pump.

-

All the lock actuators, as well as front and rear distributors, are equipped with vacuum line connectors that lock when connected.

Trunk/Liftgate Sensor/Switch (For Alarm) > < Ignition Key In Signal, Antitheft|Service and Repair|Page 4663