S8 Quattro Sedan V8-4.2L (AYS) (2002)
6
-
Pivot pin
-
Note varying lengths
-
Peening, see Fig.1
7
-
Clip
8
-
Hinge arm
9
-
Securing pin
-
Assembly, see Fig. 3
Fig. 1 Peening pivot pin
NOTE: Before peening the pivot pin, protect painted surfaces using a fabric-backed adhesive tape.
-
Support pre-assembled door handle on a solid surface (e.g. jaws of a vice).
-
Secure pivot pins against falling by creating a light center punch mark.
-
After peening pivot pins, check hinge arm for freedom of movement.
Fig. 2 Correct installation position of spring
-
Install springs -1- as shown.
-
Grease with G 052 745 A3.
-
Pivot pin - 2-.
Fig. 3 Installing locking pins