S8 Quattro Sedan V8-4.2L (AYS) (2002)
Glove Compartment Lock: Service and Repair
Lock Cylinder And Push Button For Glove Box, Removing And Installing
Special tools and equipment
-
Precision mechanic screwdriver; 1.6 x 40 mm
Removing
-
Remove glove box and place in floor outlet.
-
Turn vehicle key approx. 45 degrees - a -.
-
Insert precision screwdriver into hole (arrow).
-
Lock screwdriver into guide tab (arrow).
-
Press guide tab upward.
-
Lock cylinder is unlocked (if necessary, correct key position slightly).
-
Pull out lock cylinder with vehicle key inserted.
NOTE: Shown in illustration with lock removed.
-
Loosen screw (arrow) through hole for lock cylinder until retaining bracket slides back.
-
Remove push button from front.