S8 Quattro Sedan V8-4.2L (AYS) (2002)
Rear Shelf: Service and Repair
Hat Shelf, Removing And Installing
1
-
Hat shelf
-
Removing:
-
Loosen lower mounting of three-point seat belt left and right Fig. 1.
-
Remove rear seatback or individual seat rear.
-
Clip cover for belt guide - 6 - and - 10 - off.
-
Pry out covers (left and right) at tab - 7 - and - 11 - at belt height adjustment - 5 - and - 12 -.
-
Remove expanding clips - 2 -.
-
Unclip power sunshade cover - 8 - if vehicle is so equipped.
-
Slide foam sleeve - 4 - back and separate connectors - 3 - for sunshade and 3rd brake light.
-
Vehicles with power sunshade - 9 -:
-
Remove mounting nuts in luggage compartment
-
Raise shade box so screws are released from hatshelf.
-
Pull hat shelf forward slightly toward center of vehicle out of guides (arrows) and remove.
2
-
Spring clip
3
-
Connector
-
For 3rd brake light
-
For sunshade
4
-
Foam sleeve
-
For connector
5
-
Belt height adjustment
6
-
Cover