S8 Quattro Sedan V8-4.2L (AYS) (2002)
Head Rest: Service and Repair
Headrest Adjustment Motor and Sensor, Removing and Installing
Headrest Adjustment Motor And Sensor, Removing And Installing
-
Seat removed
-
Seatback cover and seatback cushion
Removing
-
Remove 3 hex head bolts from engine for headrest adjustment at seatback frame.
-
Remove bendable driveshaft - 6 - from motor.
-
Cut open tie wraps and disconnect connectors - 2 - through - 5 -.
-
Unclip sensor for headrest adjustment - 1 - from motor.
-
Remove retaining bracket from motor.
Installing
-
Clip on sensor for headrest adjustment to motor.
-
Screw retaining bracket to motor or seatback with 6 Nm (53 in.lb.).