S8 Quattro Sedan V8-4.2L (AYS) (2002)
Seat Heater: Service and Repair
Seatback Heating Element, Replacing
Seatback Heating Element, Replacing
CAUTION: Note safety specifications when working on airbag.
-
Remove front seat.
-
Remove seatback cover.
Seatback heating element (pushed into cover), removing and installing
-
Seatback heating element - 2 - pulled out of seatback cover.
-
Slide locally manufactured hook - 1 - through opening in seat cover.
-
Hook in new seat heating element in hooks and pull in.
-
Push back excess material of heat element after pulling it through.
NOTE:
-
Make sure that heating element is not pulled through bent or crunched.
-
Excess material of seatback heater must not be installed in crushed condition during installation of seat cover.
Seatback Heating Element (bonded), Removing And Installing
-
Cut electrical wiring of old seatback heating element as far as possible.
-
Bond new seatback heating element (hatched surface) bonded on the old seat heating element - 2 -.
CAUTION: For vehicles with side airbag note instructions for seat installation.