S8 Quattro Sedan V8-4.2L (AYS) (2002)
WARNING: Brake lines must not be bent.
-
Raise vehicle.
-
Remove front left wheel.
-
Remove front half of front left wheel housing liner.
-
Unscrew retaining plate for fan resistors.
Note:
^
Protect engine compartment from escaping brake fluid.
-
Disengage intake hose -1- from hose clamp and remover.
-
Unscrew brake lines -2- and -3-.
-
Seal brake lines and threaded holes using plugs from repair kit, Part No. 1 HO 698 311 A.
-
Remove connector -1- and disconnect connector -2-.
-
Open cable ties (arrows).
-
Remove hex-nut -3-.