S8 Quattro Sedan V8-4.2L (AYS) (2002)
Brake Pedal Assy: Service and Repair
Pedal Assembly, Removing and Installing
Pedal assembly, removing and installing
Remove mounting bracket:
-
Pry off gap cover below steering column, see arrows.
-
Unscrew cover, see arrows.
-
Remove lower insulation mat.
-
Disengage cable -3- from accelerator pedal.
-
Unclip connector -4- for cruise control from clutch and brake pedals.
-
Disconnect vacuum hose -2- for cruise control from clutch and brake pedals.
-
Unclip connector -1- from brake light switch.
-
Loosen hose clamp of cable harness connection.
-
Disengage return spring -5- at brake pedal.