S8 Quattro Sedan V8-4.2L (AYS) (2002)
Brake Pad: Service and Repair
FN-3 Caliper
Note:
^
Install complete repair kit
^
After replacing brake pads and before moving vehicle, depress brake pedal several times firmly to properly seat brake pads in their normal
operating position.
^
When siphoning brake fluid, always use a bleeder bottle that is used exclusively for brake fluid. Brake fluid is poisonous. NEVER siphon brake
fluid with your mouth!
^
Check brake caliper for freedom of movement by sliding to side.
^
Wheel bolt tightening torque: 120 Nm (89 ft. lbs.)
1. Brake hose
^
Do not unscrew brake hose when replacing brake pad
2. Concealment - cap
^
Remove
3. Guide pins, 25 Nm (18 ft. lbs.)
4. Brake line, 15 Nm
^
Install in brake caliper housing
^
Attach to brake hose. Counter hold on brake hose hex when attaching.
^
Make sure lugs are properly seated in retainer grooves
5. Brake caliper housing