S8 Quattro Sedan V8-4.2L (AYS) (2002)
Parking Brake Cable: Service and Repair
Parking brake cables, removing and installing
Removing
-
Remove both rear wheels.
-
Release parking brake.
-
For Quattro vehicles, remove rear exhaust system.
-
Remove center heat insulation.
Note: Mark the position at the rear final drive where the driveshaft is bolted.
-
Remove the mounting bolts for driveshaft/rear final drive -1-.
-
Remove heat insulation in drive tunnel (arrow).
-
Loosen adjustment nut for parking brake cable using 3343 parking brake adjustment wrench.
-
Remove parking brake cable from compensator.
-
Remove locking spring (arrow) of parking brake cable.