S8 Quattro Sedan V8-4.2L (AYS) (2002)
Headlamp Alignment Sensor: Service and Repair
Left Front Level Control System Sensor -G78-
Left Front Level Control System Sensor -G78-, Removing and Installing
Removing
-
The front level control system sensor -1- is bolted to a retaining plate on the long member with two socket head bolts -5- (5 mm).
-
Disconnect connector.
-
To remove sensor from retaining plate and linkage, remove hex nut -3- and both socket head bolts -2- (3 mm) at level sensor.
-
Open clip -1- at control arm by lightly pressing together the catches. Then remove linkage -2-.
Installing
-
Install in reverse order of removal.