S8 Quattro Sedan V8-4.2L (AYS) (2002)
Transmission Position Switch/Sensor: Service and Repair
Multi-function Transmission Range (TR) switch -F125-, replacing
Removing
^
Remove left transmission support.
^
Disconnect multi-function TR switch -F125- from transmission and pull off of selector shaft.
Installing
^
Locate multi-function TR switch on selector shaft.
Flat section on gearing in switch -3- must come to rest on flat section of selector shaft -1-.
CAUTION!
^
Locate the multi-function TR switch -F125- on the center of the selector shaft.
^
Do not tilt the switch or push it on forcefully. Otherwise, the switch contacts may be damaged.
^
Rotate switch until fitting hole -4- on switch housing can be located on fitting pin -2- on transmission housing.
Tightening torques