S8 Quattro Sedan V8-4.2L (AYS) (2002)
-
Remove airbag unit from below and with impact cushion place on top.
-
Install in reverse order, noting the following:
-
Switch ignition on.
-
Connect battery.
CAUTION: When connecting battery make sure no one is inside the vehicle.
2
-
Connector orange
-
Installation location: left top in the glove box installation opening of instrument cluster
3
-
Connector, red
-
Cannot be separated from airbag unit - 1 - separated
-
If connector was loosened, airbag unit is faulty and must be replaced
4
-
Bracket frame
-
Replace after airbag has been deployed
-
Removing
-
Remove airbag unit - 1 -.
-
Remove 3 screws - 12 - and 2 screws - 13 -.
-
Remove trim for instrument cluster.