S8 Quattro Sedan V8-4.2L (AYS) (2002)
Subframe: Service and Repair
Subframe, Removing and Installing
Rear Subframe, Removing and Installing
Notes:
^
Vehicles with headlight vertical aim control, Refer to Lighting and Horns.
^
The removal work described refers to a A AWD vehicle.
^
The operations are intended to illustrate removal of the subframe as a complete unit (e.g. together with final drive, wheel bearing housing,
trapezium links ... ).
^
Wheel alignment after carrying out repair, Refer to Alignment Description and Operation.
Note! Loosen collar bolt as a first step if the work is to be carried out.
^
Additional work required on the suspension
^
Subframe is to be replaced
^
Subframe bushings are to be replaced
WARNING! To reduce the risk of accident, vehicle must be standing on the ground when loosening and tightening collar bolt.
Special tools and equipment
^
VAG 1383A and VAG1359/2