S8 Quattro Sedan V8-4.2L (AYS) (2002)
^
Disconnect connector -E-.
^
Unlock holding tab -Z- of guard plate from bracket.
^
Rotate shift lock solenoid in direction of arrow.
^
After replacing shift lock solenoid, check operation of controls.
Fig.4 Removing and installing notched plate
^
Remove guide from slide.
^
Remove bolt -1- and remove notched plate together with detent.
^
Move selector lever to "P" position.
^
Unlock holding tabs -2- of notched plate for cable lever and remove notched plate.
Fig. 5 Disconnecting and connecting selector lever cable
Disconnecting cable
^
Lift tabs -A- slightly and turn sleeve -B- approximately 45 and release lock.
^
Pull sleeve -B- from front selector lever cable (in direction of arrow).
^
Remove ball head from ball socket.
Connecting cable
^
Check gasket -C- for damage and proper seating; replace if necessary.
^
Install ball head in ball socket.
^
Push sleeve -B- on (in direction of arrow) and turn approximately 45V.
^
Check lock on sleeve -B-.