S8 Quattro Sedan V8-4.2L (AYS) (2002)
^
Install triple-roller star onto shaft as per markings and drive onto stop.
^
Insert circlip, make sure it is seated correctly.
^
Press 70 grams of G 000 605 joint grease from repair set into triple-roller joint.
^
Slide joint piece over rollers.
Note: Be sure that joint protective boot does not get damaged.
^
Press 70 grams of G 000 605 joint grease from repair set into the reverse side of the triple-roller joint.
^
Carefully clean groove for seal.
^
Insert seal into groove.
For the sake of illustration, individual parts are shown removed.
1 - Circlip
2 - Cover from repair set
3 - Sealing ring
4 - Triple-roller joint
^
Insert drive axle in press.
^
Lightly press in cover -1- from repair set, so that the circlip from repair set can be inserted.
^
Insert circlip from repair set all the way around engagement edge.
Note: Be sure circlip engages audibly.