TT L4-1.8L Turbo (BEA) (2004)
Housing Assembly HVAC: Locations
Heating And A/C Unit (With Heater Core And Evaporator), Disassembly And Assembly
1
Seal
-
Seals intake duct against air intake plenum.
-
Check and replace if damaged.
2
Air flap
-
Lightly lubricate hinge pivots with grease G 052 745 A3 or equivalent.
3
Grommet
4
Lever
5
Air distribution housing, upper part
-
Refer Fig.1 given below
-
Refer Fig.2 given below
6
Fresh/recirculation flap
-
Lightly lubricate hinge pivots with grease G 052 745 A3 or equivalent.
7
Evaporator
-
Refer Fig.2 given below
-
Refer Fig.3 given below
-
Removed evaporator contains refrigerant oil that must be accounted for in refrigerant system when evaporator replacement is necessary.
8
Pivot bushing
-
Lightly lubricate with grease G 052 745 A3 or equivalent.
9
Air distribution housing, lower part
-
Refer Fig.1 given below
-
Refer Fig.2 given below
10
Screw
11
Pivot bushing
-
Lightly lubricate with grease G 052 745 A3 or equivalent.
12
Central flap lever
13
Screw
14
Temperature flap lever