TT Coupe L4-1.8L Turbo (AWP) (2005)
Brake Caliper: Removal and Replacement
Brake Caliper, FN 3, Removing and Installing
Brake Caliper, FN 3, Removing and Installing
Special tools, testers and auxiliary items required
^
Brake pedal handle V.A.G. 1869/2
Removing
-
Remove brake pads.
-
Insert Brake pedal handle V.A.G. 1869/2 between brake pedal and drivers seat. Depress the brake pedal by at least 60 mm.
Note:
^
Pressing down the brake pedal closes the valves in the brake master cylinder to prevent the brake fluid reservoir from running dry.
-
Connect bleeder bottle hose to bleeder screw on removed brake caliper.
-
Open bleeder screw.
-
Do not remove Brake pedal handle V.A.G. 1869/2.
-
Remove brake hose from brake caliper.
Installing
Install in reverse sequence; note the following points:
-
Install brake pads.
-
Bleed brake system.
Tightening Specification