TT Coupe L4-1.8L Turbo (AWP) (2005)
Yaw Rate Sensor: Removal and Replacement
Transverse Acceleration Sensor and Rotation Rate Sensor, through 08.01, Removing and Installing
Work Procedure
-
Remove storage compartment on drivers side.
-
Unplug electrical connectors - arrows - on sensors G200 / G202.
Note:
^
Mounting bracket maybe welded instead of being bolted.
-
Remove bolt -1- and remove mounting bracket for sensors G200 / G202.
Removing and installing Rotation Rate Sensor G202
-
Unscrew nuts -a- and remove Rotation Rate Sensor G202 -1-.
-
To install: insert Rotation Rate Sensor G202 into mounting bracket and align straight before tightening.
Note:
^
The sender for rotation rate is sensitive to shocks or impact.
^
Do not install a sender which has dropped to the ground otherwise proper operation is not ensured.
Removing and installing Transverse Acceleration Sensor G200
-
Use screwdriver to pry mount -1- off Transverse Acceleration Sensor G200 -2- and remove sender.