TT Coupe L4-1.8L Turbo (AWP) (2005)
-
Remove screws - 2 - (2x). Tightening torque 0.6 Nm
-
Remove hex socket head bolt - 1 -.
-
Tightening torque 0.6 Nm
-
Remove lower steering column switch trim - 3 -.
-
Separate connection - 1 -.
-
Release locking tabs - arrows - and pull coil connector with slip ring off steering column switch.
NOTE: The steering wheel must be in the center position (wheels in straight-ahead position) when the coil connector and slip ring are removed
and installed.
-
Remove screw - 2 -.
-
Tightening torque 2.8 Nm
-
Disconnect harness connectors - 3 - (2x).
-
Remove steering column switch - 4 -.
Removing instrument panel end trim (left)
-
Use screwdriver to unclip instrument panel end trim (left) - 1 -.
Removing instrument panel end mounting plate (left)
-
Remove screws - 2 - (5x).
-
Tightening torque 3.5 Nm