TT Coupe L4-1.8L Turbo (AWP) (2005)
-
Remove adhesive fastening strip or remove transportation seal in case new component is installed.
-
Confirm steering angle sensor centered:
-
Yellow dot must be visible in hole -arrow 1- and two marks -arrows- must be aligned.
-
Install steering wheel and airbag unit.
-
On vehicles with ABS/ESP Mark 20, perform OBD function 04 - Basic setting for steering angle sensor -G85-.
-
On vehicles with ABS/ESP Mark 60, perform OBD function 04 - Basic setting for steering angle sensor -G85- and perform ESP test drive (basic
setting 093)
See VAS 5051/5052 in operating mode "Guided Fault Finding".