TT Coupe L4-2.0L Turbo (BPY) (2008)
-
Using Trim Removal Wedge 3409, pry out clamping strips - 1 - and - 2 -.
-
Disengage tab - 5-.
-
Remove release cable - 4 - from opening - arrow - in cover - 3 -.
-
Remove upholstery with cover from adhesive strips on front side of backrest shell.
Installing
Installation is reverse of removal. Observe the following when doing so:
-
When installing a new backrest shell - 1 -, protective film should be removed from adhesive strips - 2 - on front side of backrest shell before
installing upholstery.