TT Coupe L4-2.0L Turbo (BPY) (2008)
-
On vehicles with an electrical auxiliary heater (only on vehicles with diesel engine), remove Auxiliary Air Heater Heating Element (Z35).
‹› Heat exchanger, for removing and installing, refer to => [ Heat Exchanger ] See:
Removing
-
Remove 4 bolts - A - and remove cover - B -.
‹› This illustration shows an A/C unit with an Auxiliary Air Heater Heating Element (Z35).
‹› There are different versions of the cover - B - (for vehicles without or with Auxiliary Air Heater Heating Element (Z35)).
‹› If the lever - C - to the left temperature door is located unfavorably so that the upper bolt - A - is not accessible, switch ignition on and set another
temperature setting on the Climatronic Control Module (J255) A/C control head (e.g. turn temperature adjuster to "Warm" end position).
-
Cover carpet in area under heat exchanger with waterproof foil and absorbent paper towel.
-
Remove bolts - A - and remove clamps - B - from connections of coolant pipes - C - and - D - at heater core - E -.