TT Coupe L4-2.0L Turbo (BPY) (2008)
-
Remove diamond disc - 3 - from toothed belt gear.
-
Remove bolts - 1 to 10 -.
-
Pry off and remove front sealing flange.
-
Drive out seal from removed flange.
Installing
‹› Tightening torque => [ Front Sealing Flange Assembly Overview ] See: Front Sealing Flange Assembly Overview
‹› Place a rag over open part of oil pan.
-
Carefully remove any sealant residue from cylinder block and oil pan.
CAUTION!
Wear safety glasses.
-
Remove sealant residue from sealing flange e.g. with a rotating plastic brush.