TT Coupe L4-2.0L Turbo (BPY) (2008)
-
Remove vibration damper.
‹› To loosen and tighten vibration damper, counter hold at center bolt with open end wrench.
Installing
Installation is in reverse order of removal, note the following:
‹› Tightening torques => [ Ribbed Belt, Assembly Bracket Assembly Overview ] See: Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair/Ribbed Belt, Assembly Bracket Assembly Overview
-
Install vibration damper using only original equipment bolts.
‹› Only possible to install in one position: The vibration damper crankshaft hole - arrow - must be positioned over protrusion on toothed belt
sprocket