TT Coupe L4-2.0L Turbo (BPY) (2008)
6 - Alignment pin
7 - Cylinder block
^
Piston and connecting rod, disassembling and assembling
8 - Bolt
^
Tightening order
Rear tightening sequence
^
Proceed as follows:
^
Install bolts - 1 to 8 - and tighten by hand.
^
Tighten bolts - 1 to 6 - diagonally in stages to 15 Nm.
^
Tighten bolts - 7 to 8 - to 15 Nm.
Installing intermediate plate
^
Hook in intermediate plate at sealing flange and push it onto alignment sleeves - arrows -.