TT Coupe L4-2.0L Turbo (BPY) (2008)
Relay Box: Service and Repair
Relay and Fuse Panel In Engine Compartment E-Box
Relay And Fuse Panel In Engine Compartment E-box, Removing And Installing
Removing
-
With ignition switched off, disconnect battery Ground (GND) cable.
-
Remove engine compartment E-box cover by sliding latch in - direction of arrow -.
-
Remove relay - A - and control modules - B - from relay carrier.
-
Remove Suppressor C24 - item C - from relay and fuse panel and disconnect electrical connector.
-
Release retaining clips - A arrows - and press fuse panel - 1 and 2 - and relay carrier - 4 - back out of relay and fuse panel.
-
Release retaining clip - arrow B - and tip relay and fuse panel - 3 - up - arrow C - out of engine compartment E-box.
Installing
Install in reverse order of removal, noting the following:
-
Connect battery. Required actions.