TT Coupe L4-2.0L Turbo (BPY) (2008)
Flywheel: Service and Repair
Rear Sealing Flange and Dual-Mass Flywheel Assembly Overview
Rear Sealing Flange and Dual-Mass Flywheel Assembly Overview
‹› Servicing clutch: => Automatic Transmission 30 Removal and Installation
1
Bolt
‹› For dual-mass flywheel/drive plate
‹› 60 plus an additional 90° (1/4 turn)
‹› Replace
2
Dual mass flywheel
‹› Dual-mass flywheel, removing and installing => [ Dual-Mass Flywheel ] See: Dual-Mass Flywheel
‹› Only possible to install in one position. Bores are offset.
3
Intermediate plate
‹› Must be located on dowel sleeves
‹› Do not damage or bend when doing assembly work
‹› Is hooked in at sealing flange => [ Installing intermediate plate ]