TT Coupe L4-2.0L Turbo (CCTA) (2008)
/Page-590003.png)
-
Engage the pressure fork (VAS 5161/2) on the engaging device as illustrated.
Exhaust side:
-
Engage the pressure fork (VAS 5161/2) on the engaging device as illustrated.
Continued for both sides:
-
Press the installation cartridge down with the pressure fork.
-
At the same time, rotate installation cartridge knurled screw right until points engage in valve cotter.
-
Move the knurled bolt to the left and right.
‹› Valve keepers are pressed against each other and capture in the installation cartridge.
-
Release pressure fork.
-
Remove installation cartridge.
-
Unfasten guide plate and turn it aside.
-
Remove valve spring with valve spring plate.
-
Remove the valve stem seal with the valve seal removal tool (3364).