TT Quattro Coupe L4-1.8L Turbo (AMU) (2001)
/Page-2185001.png)
Front Bumper: Service and Repair
Front Bumper, Removing, Installing And Assembly Overview
1
-
Trim
Removing:
-
Open engine hood.
-
Detach front part of wheel housing liner.
-
Remove screws - 3 - and take off securing strip - 2 -.
-
Remove screws - 14 - and - 16 -, then detach wheel spoiler - 15 -.
-
Release quick-release fasteners on wheel housing liners and noise insulation Fig. 2.
-
Remove screws - 17 - at bottom of trim from noise insulation.
-
Unscrew nuts - 11 - from inner side of wheel housing.
-
Loosen screws - 10 - and press guide profile - 12 - slightly downward.