TT Quattro Coupe L4-1.8L Turbo (AMU) (2001)
Alignment: Service and Repair
Camber at Front Wheels, Adjusting
Front axle camber, adjusting
-
Remove nut (arrow)
-
Insert tool T 40021 in laterial control arm as shown in illustration.
-
Thread in knurled-head bolt to threaded pin.
-
Engage nut to contact on special tool.
-
Remove two bolts (arrows).
-
Camber can be adjusted by turning nut on special tool.
Use new nuts.
-
Tighten new nuts to 75 Nm