TT Quattro Coupe L4-1.8L Turbo (AMU) (2001)
Front Door Window Motor: Testing and Inspection
Basic Setting For Window Regulator Motor, Activating
Basic Setting For Window Regulator Motor, Activating
NOTES:
-
The following repair procedures must be completed after installation of replacement parts.
-
All sealing and trim must be fully installed.
-
Door and window regulator must be adjusted.
-
Door must be fully assembled and closed.
-
Follow the subsequent repair procedure carefully and without interruption.
-
Breaks longer than 10 seconds are considered and interruption in "activation mode".
-
Close door and turn ignition on.
-
Run window up to top position (fully closed).
-
Release window regulator switch.
-
Pull window regulator switch up again, and hold in position longer than 1 second.
-
Run window down to bottom position (fully open) by pressing window regulator switch down.
-
Run window up to top position (fully closed).
-
Release window regulator switch.
-
Pull window regulator switch up again, and hold in position longer than 1 second.
-
Basic setting for window regulator is now activated.
-
Activate "one-touch" opening and closing function.