TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Brake Caliper: Service and Repair
Front Brake Caliper - FN 3, Servicing
Notes:
^
When carrying out repairs install all parts supplied in repair kit.
^
New brake calipers are filed with brake fluid and are pre - bled.
^
Apply thin coat of fitting paste G 052 150 A2 to brake cylinders, pistons and seals.
1. Protective seal
^
Do not damage when inserting piston
2. Bleed valve
^
Apply thin coat of assembly paste G 052 150 A2 to threads before screwing in
3. Cap
^
Insert in mounting bushing
4. Guide pin, Tighten to 25 Nm
5. Mounting bushing
^
Insert into brake caliper housing
6. Brake caliper housing
7. Brake carrier
^
Install on brake caliper housing
8. Retaining spring
^
Insert with both ends in the holes in brake caliper housing
9. Seal
10. Piston
^
Piston diameter: 54 mm
11. Protective seal
^
Do not damage when inserting piston