TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
/Page-678002.png)
15 -
Crankshaft sprocket
-
Contact surface between sprocket and crankshaft must be free of oil
-
Can only be installed in one position
16 -
90 Nm + 1/4 turn (90°) further
-
Replace
-
Counter - hold with 3099 to loosen and tighten
-
Place 2 washers between sprocket and retainer when screwing on retainer
17 -
15 Nm
18 -
20 Nm
19 -
Toothed belt guard, center
20 -
Toothed belt guard, bottom
21 -
10 Nm