TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Vacuum Reservoir: Locations
Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80- And Vacuum Reservoir, Component Overview
NOTE: Arrows on the hose/pipe connections must line up across from each other.
1
Rubber grommet
2
Socket
3
8 Nm
4
Vacuum reservoir
5
Check-valve
-
inserted in vacuum reservoir
6
Bracket
-
for Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
7
Test connection
8
Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
-
Component location: Front right in engine compartment
9
From EVAP canister
10
Electrical 2-pin harness connector
-
for Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
11
Check-valve
-
Installation position (light/dark side): Arrow points in direction of aperture, as shown in figure.
12
to intake tube at turbocharger
13
Check-valve
-
Installation position (light/dark side): Arrow points in direction of aperture, as shown in figure.
14
to Intake manifold
15
Rubber grommet
16
to EVAP canister
17
Rubber grommet
18
Bracket
-
for vacuum reservoir