TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
-
Remove connector - 1 -for air mass sensor.
-
Unscrew bolts - 2 - on air filter housing - 3 -and place housing to the left side.
-
Place absorbent towel under the hydraulic unit in order to collect brake fluid.
Notes: Brake lines in area of hydraulic unit must not be bent.
-
Unscrew brake lines from brake master cylinder to hydraulic unit (arrows), and protect against dirt with caps from repair set 1 HO 698 311 A.
-
On vehicles with left hand drive, tie up disconnected brake lines with wire, so that brake line ends are higher than brake fluid level in reservoir.