TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Fig. 2
Installation position of upper and lower sections of subframe mounting
A - Upper section of mounting without collar: ribs go toward body.
B - Lower section of mounting with collar: goes toward bolt head.
Fig. 3
Crossmember component location
-
Always replace bolt after removing.
-
Tightening torque: 30 Nm + turn additional 90°.
-
Install using locking compound D 000 600 A2.
F - Driving direction
1 - Carrier
2 - Install rivet nuts M10 using VAG1765B
3 - Crossmember: install with printed "L" (left) in driving direction
Foam strips toward bottom (arrow).
4 - Hex bolt M10 X 45
VAG1765B pliers
Subframe, removing and installing
Special tools and equipment