TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Acceleration Sensor: Service and Repair
ABS/ESP ITT Mark 20
Longitudinal acceleration sensor -G251-, removing and installing
Removing
-
Remove glove box:
-
Unplug electrical connector -2-
-
Use a screwdriver to pry mount off longitudinal acceleration sensor -arrows- and remove sensor -G251- -1-.
Note:
-
The longitudinal acceleration sensor is not resistant to shocks or impact.
-
Do not install a sensor which has dropped to the ground otherwise proper operation is not ensured.
Installing
Install in reverse sequence; note the following points:
-
Initiate basic setting for longitudinal acceleration sensor -G251-. See: Adjustments