TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
-
Press drive axle out.
Notes: When pressing drive axle out ensure sufficient clearance is available.
-
Remove drive axle from wheel bearing housing and tie up.
Notes: Place transmission jack VAG1383/A with universal support VAG1359/2 underneath (danger of accident from falling parts when pulling
out the wheel hub and the wheel bearing).
Pulling out hub
-
Insert thrust bolts - 1 - in wheel bearing housing.
-
Install support - 2 -, hollow piston cylinder - 3 - with pull rod and special nut - 4 -.
-
Hold appliance firmly and pull wheel hub out.
1 - Thrust bolt E - 15
2 - Support E - 40
3 - Hollow piston cylinder HKZ - 15
4 - Special nut E - 8 - 214 and pull rod
5 - High pressure hose with quick release coupling
Pulling out wheel bearing
-
Remove circlip.