TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
-
VAG 1459B Hydraulic removal and installing tool for wheel bearing
-
Hollow piston cylinder HKZ - 15 with hydraulic press piece E - 0 - 204 - T
-
Pull rods E - 0 - 217+218
-
Special nut E - 8 - 214
-
Thrust piece E - 5
-
Thrust piece E - 10
-
Thrust piece E - 13 - 1
-
Press sleeve E - 65 - 1
-
Thrust bolt E - 15
-
VAG1459 B/2 Supplementary set
-
Support E - 40
Preparing wheel bearing housing for pressing out
-
Pull off trim cap for light alloy wheels (use puller in vehicle tool kit).
-
Lift vehicle until the load on the front axle is relieved.
-
Loosen 12 - point nut.
-
Remove wheels.