TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
-
Apply special tool 3423 as shown.
-
Screw cross - piece Kukko 18 - 0 into special tool 3423.
-
Apply special tool 40 - 105 to wheel hub and pull off bearing inner race by turning threaded spindle.
Fig. 6
Coat complete inside surface of wheel bearing housing with MoS2 grease (AOS 115 000 01)
Notes: A grease pad (3 grams) is supplied with replacement wheel bearings.
Fig. 7
Pressing wheel bearing into wheel bearing housing
Notes: After pressing in the wheel bearing, insert circlip go to Fig. 3.