TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Note:
^
Components require fastener installation in the numbered sequence (left side as shown)
^
Right side installation similar to left.
After adjusting and / or replacing components
-
Perform "Basic setting for window regulator motor, clearing" again, (see AESIS Repair Manual, Body Exterior; Repair Group 64, Glass, Window
regulators, Door window, removing and installing).
Note:
^
During procedure, doors must be closed and engine operating at idle.
^
The door window glass must contact upper door frame / (folding top) seal for window motor to "learn" the additional resistance.
With Basic setting cleared:
-
Perform "Basic setting for window regulator motor, activating" again, (see AESIS Repair Manual, Body Exterior; Repair Group 64, Glass, Window
regulators, Door window, removing and installing).
With Basic setting activated:
-
Check that condition has been eliminated, verify all window functions.
-
Check and clear any stored DTCs.
When procedure applies to vehicles within the New Vehicle Limited Warranty, use the table as shown.