TT Quattro Coupe L4-1.8L Turbo (BEA) (2003)
/Page-2884001.png)
Brake Caliper: Service and Repair
Front Brake Caliper - FN 3, Removing and Installing
Brake caliper- Front brakes FN 3, removing and installing
Special tools and equipment
^
Brake pedal depressor VAG 1 869/2
Removing
^
Remove brake pads.
^
Insert brake pedal depressor VAG 1869/2 between brake pedal and driver's seat. Depress the brake pedal by at least 60 mm.
Note: Pressing down the brake pedal closes the valves in the brake master cylinder to prevent the brake fluid reservoir from running dry.
^
Connect bleeder bottle hose to bleeder screw on removed brake caliper.
^
Open bleeder screw.
^
Do not remove brake pedal depressor VAG 18169/2.
^
Remove brake hose from brake caliper.
Installing
Install in reverse sequence; note the following points:
^
Install brake pads.
^
Bleed brake system.
Tightening torque
