TT Quattro Coupe V6-3.2L (CBRA) (2008)
Carpet: Procedures
Control Module Access Carpet Frame, Inserting
Cut through floor mat in control module area and fold up.
-
Cut left side of floor mat along the perforation - A arrows - using a standard carpet knife - 1 -.
-
Cut right side of floor mat along the perforation - B arrows - using a standard carpet knife - 1 -.
-
Fold floor covering cut-out to side.
Control module carpet frame, inserting
-
Insert left side of carpet frame - 2 - in floor mat - 5 -. Pull open tab - 1 - in under carpet frame - 2 -.
-
Insert right side of carpet frame - 3 - in floor mat - 5 -. Pull open tab - 4 - in under carpet frame - 3 -.