TT Quattro Coupe V6-3.2L (CBRA) (2008)
Installation
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
-
align headliner before securing.
Sun Visors
Removing
-
Disengage sun visor - 4 - in vehicle center from sun visor center bracket and fold this to side.
-
Remove cover cap - 3 - from sun visor bearing - 1 -.
-
Remove bolt - 2 - and remove sun visor - 4 -.
-
Remove sun visor connector - 6 - from sun visor bearing - 1 -.
-
Disconnect sun visor connector - 6 - from wiring harness connector - 5 -.