TT Quattro Coupe V6-3.2L (CBRA) (2008)
‹› Note installation position
6
Bolt
‹› 8 Nm
7
Oil Pump Drive Cover
8
O-ring
‹› Replace
‹› Oil to install
9
Oil Pump Drive
10
Intermediate Shaft
11
Thrust Washer
12
Bolt
‹› Insert with locking compound; Locking compound.
‹› 10 Nm
13
Oil Spray Jet for Piston Cooling
‹› For crankshaft bearing 2 to 7
‹› Opening pressure 2.0 bar pressure
‹› Removal and installation, refer to => [ Oil Spray Nozzle, Removing and Installing ]
14
Oil Pump Driveshaft
15
Oil Pump
‹› Disassembling and assembling, refer to => [ Oil Pump Assembly Overview ] See: Oil Pump/Service and Repair/Oil Pump Assembly Overview
‹› Coat oil pressure line to cylinder block and at oil pump housing with sealant
16
Bolt
‹› 23 Nm
17
Oil Drain Plug
‹› 30 Nm
18
Oil Pan
‹› Removal and installation, refer to => [ Oil Pan ] See: Oil Pan
‹› Tightening specifications and tightening sequence, refer to => [ Oil Pan - Tightening Specifications and Tightening
Sequence ]
19
Oil Level Thermal Sensor (G266)
20
Bolt
‹› Tightening specifications and tightening sequence, refer to => [ Oil Pan - Tightening Specifications and Tightening Sequence ]
21
Oil Filter Housing