TT Quattro Coupe V6-3.2L (CBRA) (2008)
Note:
^
You must lay a cloth on the cross member -arrows-.
^
If oil gets on the cross member or enters the perforations in the cross member, it must be carefully removed.
-
Place reservoir underneath.
-
Remove oil level inspection plug -arrow-. (Shown with final drive removed for sake of a better illustration).
Oil level is correct if Haldex clutch is filled to lower edge of oil filler hole or up to 3 mm below oil filler hole.
-
If necessary, top off high performance Haldex clutch oil
Torque specification
Oil filler plug -arrow- .................................................................................................................................................................................................. 15 Nm